Building Espresso Bathroom Vanity
Espresso bathroom vanity – Updating an old worn vanity is a great way to change the appearance of each bathroom. Your new vanity can add drama and quickly become the focus of the room. You can buy your own device, use an antique dry well or agency or build your own and make a real one-of-a-kind play that matches your existing interior design.
Measure the space you have for an espresso bathroom vanity. Draw a rough sketch of the cabinet dimensions and order your countertop from a local hardware store. Build a base from plywood. Glue tabs to the front. This will act as a toe kick for the cabinet. The height of the base should be 4 1/2 inches, the depth should be 21 inches, and the width should be proportional to the dimensions you have. Use one of four inch boards for the sides and back, then level the base with shims. Add a support rail on the rear wall, 29 1/4 inches from the top of the base.
The bottom of the trim should be an inch wide, and the top piece two inches wide espresso bathroom vanity. Either tick the corners to get a more beautiful look or cut a piece of wood either bit so that they overlap. Attach the door fronts with hinges and screws. Add door handle. Add a shelf on the inside of the cabinet, half the depth of the cabinet. Attach the shelves on each side of the unit, cut a piece of plywood to size and nail it to support. If plumbing will be in the way, make the shelf so it only stretches halfway or removes a shelf altogether.