Best Ideas For Cube Shelving

Good Cube Wall Shelves

Before setting up any type of open cube storage system, you first need to get the right number of suitable storage cubes. Measure the available space for the open cube storage system and use the measurements to determine how many cubes you will need. When shopping for cube shelving, be sure to choose sturdy storage cubes that can withstand good stacking. Open storage cubes are convenient for a number of different uses, but they can be especially effective for storing paperback books, magazines and similar items. And you can also use open cube storage to store CDs and DVDs, and then making it easier to create a home entertainment center and keep your media organized and ready at hand.
And you can build a single cube platform to show an item or a series of cube shelves to create an attractive storage solution. You can even cover an entire wall with bucket shelves. As shelves go, they are easy to make and cost little in the way of supplies. Set aside one hour for each shelf, although you should be able to do them much more quickly once you hang from it. Then preparation of lumber cut the iron into five sections, each 12 inches by 12 inches, using your electric saw. And then drill two holes in the face of four of the planks. Drill four holes through the 12-inch by 12-inch side of the beam face that has not yet been drilled. Sand all sides of the wood. Apply a coat of paint to all sides of the wood. Allow to dry.
The best cube shelving is an elegant way to display small objects, art or other decorations on your walls. Ideas for hang the cube shelving. Place the cube shelf on a surface with the back facing up. Put the cardboard on the cube. Draw the outline of the cube on the cardboard with a pencil. Drill holes through the cardboard where the lock of the brackets will be turned over using the pencil. Handy the outline of the cardboard cube with a knife. Place the cut cardboard on the wall where you will hang the shelf.  Drive the screw in wall studs in the locations marked with a screwdriver. Tighten the screws so that the anchor tip expands. Align the hub on the wall over the screws; slide the keyhole bracket over them and the bottom shelf in place.

READ ALSO :   Building Folding Shelves